FORD SID901 ECU/TCU Cloning Service | 1:1 Data Transfer | Plug & Play
Professional 1:1 cloning for FORD SID901. Full data transfer including IMMO and VIN. No dealer coding required. Plug & Play solution via BOOT. Full 1:1 cloning supported with complete data transfer. Cloning performed via boot mode.
Select Option
No VAT applicable
Professional 1:1 ECU/TCU Cloning Service for FORD SID901
Is your engine or gearbox control unit faulty? Our 1:1 data transfer service is the most reliable way to get your FORD back on the road. We transfer all critical data—including Immobiliser, VIN, Coding, and Mileage—from your original unit to a donor ECU.
⚠️ SERVICE REQUIREMENTS:
To perform this cloning service, you must send us TWO units:
- 📦 1. ORIGINAL ECU: Your faulty or damaged unit (must have communication for data retrieval).
- 📦 2. DONOR ECU: A working replacement unit with matching Hardware (HW) numbers.
Don't have a donor? Contact us—we can often source one for you or check compatibility.
Why choose our cloning service?
- No Dealer Coding: 100% Plug & Play. Simply install the cloned ECU and start the engine. No expensive dealer programming required.
- Original Calibration: Your existing maps and configuration are preserved exactly as they were.
- Safe Methods: We use professional tools to work in BOOT mode, ensuring data integrity without unnecessary hardware stress.
🚀 Power Up: Stage 1 Performance Remap
Since your ECU is already on our bench, it's the perfect opportunity for a Stage 1 Performance Remap. We can optimize the software to increase power and torque by up to 30%, while improving throttle response and fuel efficiency.
Add "Stage 1 Remap" to your order to save on shipping and labour costs!
Technical Specifications
| Manufacturer | FORD |
| Module Type | SID901 |
| Performance Options | Stage 1 Remap / Addons |
| Cloning Type | 1 TO 1 (IF THE EEPROM IS EXTERNAL MOVE IT PHYSICALLY) |
| Cloning Method | BOOT |
| IMMO | NO |
| Virgin | NO |
| IMMO OFF available | YES |
Service Capabilities
✓ FULL CLONING SUPPORTED
Ford SID901 supports complete 1:1 data transfer including:
- Complete module programming
- Immobiliser data (if present)
- VIN number
- Mileage
- Vehicle-specific coding
Cloning Method
This module requires the following access method:
- Boot mode: Module accessed via special boot loader protocol for reading/writing
⚠️ Special requirement: This module requires physical EEPROM chip transfer from original to donor unit.
Frequently Asked Questions
What is ECU/TCU cloning?
ECU/TCU cloning is a 1:1 data transfer process where we copy all programming, immobiliser data, VIN, and coding from your original (faulty) control unit to a donor unit of the same type. This ensures the cloned unit works exactly like your original without requiring dealer programming.
Do I need to send both the original and donor SID901?
Yes, for cloning service you must send us both units:
- Original unit: Your faulty Ford SID901 (must have communication to read data)
- Donor unit: A working SID901 of the exact same part number (we can help source this)
How long does Ford SID901 cloning take?
Most cloning services are completed same-day once we receive both units. Complex ECUs with encrypted immobiliser data may require 24-48 hours. We'll notify you of any delays.
Will the cloned SID901 work straight away?
Yes! After cloning, the donor unit contains all data from your original including VIN, mileage, immobiliser coding, and vehicle-specific calibrations. It should work as plug-and-play in most cases. Some vehicles may require a brief initialization drive cycle.
What if my original SID901 is completely dead?
The original unit must have at least partial communication for us to read the data. If it's completely dead with no communication, cloning is not possible. In this case, you may need virgin programming from a dealer or specialist with original manufacturer software.
Is cloning better than virgin programming?
Yes, cloning is preferred because:
- Retains all original vehicle coding and calibrations
- Transfers immobiliser data (no key programming needed)
- Preserves mileage and VIN
- No dealer involvement required
- Usually faster and more cost-effective
How it works
- You purchase the service.
- You choose whether the courier collects your parcel or you drop it off at a drop-off point.
- You fill in the form – we'll send you the link by email.
- You pack the parcel and put a note with your order number inside.
- We perform the service and send the parcel back to your address.
Technical Specifications
Customer Reviews
Write a Review
Share your experience with this product
You may also like
View all
VAG EDC17CP14 ECU/TCU Cloning Service | 1:1 Data Transfer | Plug & Play
From
£99
VOLVO MB279700-95xx ECU/TCU Cloning Service | 1:1 Data Transfer | Plug & Play
From
£99
VAG MED17.5.25 ECU/TCU Cloning Service | 1:1 Data Transfer | Plug & Play
From
£99
FCA GPEC3 ECU/TCU Cloning Service | 1:1 Data Transfer | Plug & Play
From
£99
Ready to Enhance Your Vehicle?
Whether you're looking to boost performance or secure your vehicle, our expert team is here to help.
Get Started Today